DIRECTIONS FOR USE
READ ENTIRE LABEL — USE IN ACCORDANCE WITH LABEL INSTRUCTIONS

When using this product as a space spray in food processing plants, foods should be removed or covered during
treatment. Do not apply as a space spray while food processing is underway. Food processing surfaces and equipment
must be covered during treatment or cleaned with an effective detergent and rinsed with potable water before reuse.
Food processing operations may continue when this product is applied as a surface spray with care and in accordance
with the directions and precautions given below.

SHAKE WELL BEFORE USING

Maintain agitation in all spray systems Essentria IC3 is intended for use in and around buildings and structures as well
as modes of transport.
INDOOR USE AREAS: Incudes, but is not limited to, apartment buildings, bakeries, beverage plants, bottling facilities,
breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry
facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings,
kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and
vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses
and similar structures.
OUTDOOR AREAS: Includes, but is not limited to, building foundations, dairy facilities, drive-in restaurants, drive-in
theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape
areas, trees, turf and zoos.
MODES OF TRANSPORT: Aircraft, buses, trucks, trailers, rail cars and marine vessels. NOTE: For sensitive
indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before
spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that Essentria IC3
may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe
off with clean cloth. Essentria IC3 may be diluted with water or oil and applied with conventional application equipment
including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the
amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil
dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21
(especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent or the equivalents).
Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No
label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against
such mixing. Most effective results are achieved when used as part of a treatment protocol that includes physical,
environmental and other chemical pest control measures.

INDOOR USE
Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.
GENERAL PEST CONTROL: To control accessible, exposed stages of crawling insects including, but not limited to,
ants, bed bugs, cockroaches, cadelles, cigarette beetles, dark mealworms, dried fruit beetles, drugstore beetles,
confused floor beetles, fleas, grain mites, fowl mites, mites, nuisance beetles (such as lady beetles), red flour beetles,
rice weevils, sawtoothed grain beetles, spiders, spider beetles, yellow mealworms in sites that include, but are not
limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the
rate of up to 0.5 to 6 fluid ounces of Essentria IC3 per gallon of water (use lower rate for maintenance service and
higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with
special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. When treating for
bedbugs thoroughly clean, vacuum, and air mattresses and springs prior to treatment. Mix Essentria IC3 at a rate of 1
to 4 ounces per gallon of water and apply as a spot treatment to cracks and crevices, around baseboards, floorboards,
headboards, and walls. In hotels and other public lodging facilities pay special attention to luggage stands and the
adjacent area. On mattresses and springs spot treat only areas that may harbor pests. Concentrate on tufts, seams,
folds, and creases. Repeat as necessary. To prevent potential discoloring, do not spray on visible areas (i.e.
baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when Essentria
IC3 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions
given above. FOggINg: To control crawling and flying insects (moths and flies, including house flies, horse flies, stable
flies, horn flies, mosquitoes, gnats, fruit flies, phorid flies, etc) in sites that include, but are not limited to, food
processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns,
horse barns, poultry barns, swine houses, zoos and warehouses), Essentria IC3 may be applied as a space spray
through conventional fogging equipment misting systems (including mist sprayers and mist blowers), automated spray
systems, and/or related application technologies. Cover or remove exposed food and cover food-handling surfaces in
edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off
air conditioning or ventilating equipment. Mix 4 to 10 ounces of Essentria IC3 insecticide with sufficient oil to equal 1
gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3
fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for
at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on
painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant.
When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals

OUTDOOR USE
PERIMETER TREATMENTS AND RECREATIONAL AREAS: To control aphids, ants, bees, boxelder bugs, centipedes,
cockroaches, crickets, darkling beetles, firebrats, fleas, ground beetles, fowl mites, mites, millipedes, pillbugs, silverfish,
sowbugs, spiders, ticks and wasps. In compressed air sprayers, dilute 1 to 8 ounces of Essentria IC3 per gallon of water
(use lower rate for maintenance service and higher rates for active infestations) and apply at the rate of 2 gallons per
1000 square feet or until area is thoroughly wet. Also apply to a band of soil and vegetation 6 to 10 feet wide around
and adjacent to buildings. Treat the building foundation to a height of 2 to 3 feet with sufficient water for coverage.
Make special efforts to spray areas where pest species congregate such as, but not limited to, waste receptacles,
dumpsters, unoccupied picnic tables, the exterior of food handling establishments, and food pavilions. Additionally
apply around potential entry areas such as, but not limited to, eves, windows, doorways, porches, porch lights, and
around utility boxes. For power sprayers, mix approximately 1 to 6 ounces of Essentria IC3 per gallon of water (use
lower rate for maintenance service and higher rates for active infestations) and apply until area is sufficiently covered
(usually min. 4 gallons per 1000 square feet.). Maintain agitation. Repeat as necessary. MOUND DRENCH METHOD -
FOR CONTROL OF FIRE ANTS AND OTHER MOUNDINg ANTS: Dilute 2 to 4 ounces of Essentria IC3 per gallon of
water. Apply 1 to 2 gallons of emulsion to each mound area by sprinkling the mound until it is wet and treat a 4 foot
diameter circle around the mound. Use the higher volume for mounds larger than 12 inches. For best results, apply in
cool weather, such as the early morning or late evening hours, but not in the heat of the day.
MOSQUITO CONTROL AND OTHER BITING FLIES - OUTDOOR YARD OR BARRIER TREATMENT: To control adult
mosquitoes and other biting flies using ground application, dilute 1 to 3 fluid ounces of Essentria IC3 per gallon of water.
Treat harborage areas such as shrubbery and vegetation where mosquitoes/flies may rest. Shrubbery and vegetation
around stagnant pools, marshy areas, ponds and shorelines may be treated. Repeat as necessary.
MOSQUITO CONTROL AND OTHER BITING INSECTS - AUTOMATIC SPRAYING SYSTEMS: Automatic spraying
systems must not be programmed to release pesticides where food or feed is directly exposed. To control flies, house
flies, horn flies, stable flies, horse flies, mosquitoes and gnats, add concentrate to tank and add water to obtain desired
dilution. Agitate well while adding water and maintain thorough agitation while system is in use. In automatic spraying
systems like, but not limited to, misting systems used for mosquito and other biting insect control, solutions of Essentria
IC3 may be stored for extended periods of time, not to exceed one month, as long as the system has agitation and the
appropriate quantity of adjuvant is used. Dispense diluted concentrate through automatic spraying system. Set nozzles
to deliver one ounce liquid per minute. Locate nozzles to cover a maximum of 2,000 cubic feet of space per nozzle. Set
timer to operate in accordance with equipment directions. Dilute Essentria IC3 just prior to use at 0.5 to 3 ounces per
gallon of water (Use lower dilution rates for preventative applications). TO CONTROL SPIDERS, FLYING INSECTS,
AND OTHER NUISANCE PESTS ON AND AROUND BOAT DOCKS: As an aid in the elimination of their harborage
areas, dilute 2 to 8 ounces of Essentria IC3 per gallon of water and apply at the rate of 2 gallons per 1000 square feet
or until area is thoroughly wet. Since flying insects can migrate in and out of the treatment area, it is recommended to
use this product as part of an Integrated Pest Management (IPM) program. This includes, but is not limited to,
eliminating breeding and harborage sites. USE ON TURF AND gRASS: Used alone as a contact spray. To control Ants,
Armyworms, Billbugs, Chinch Bugs, Chiggers, Crickets, Cutworms, Earwigs, Fleas, Grasshoppers, Hyperodes Weevils
(adults), Japanese Beetles (adults), Mole Crickets, Sod Webworms and Ticks, dilute in a compressed air sprayer (or
backpack) 2 to 4 ounces of Essentria IC3 per gallon of water and apply at the rate of 2 to 4 gallons per 1000 square
feet or until area is thoroughly wet. For power sprayers mix approximately 2 to 4 ounces per gallon of water and apply
until area is sufficiently covered (usually min. 4 gallons per 1000 square feet with power sprayer). Exceeding rates may
create potential phytotoxicity of turf surfaces. USE ON NON-BEARINg TREES AND SHRUBS: To control Mites, Scale
Insects, Mealybugs, Aphids, Lace Bugs, Whiteflies, Tent Caterpillars, Bagworms and Beetles, dilute up to 1 to 2 ounces
of Essentria IC3 per gallon of water and apply using a compressed air sprayer or power sprayer until foliage is
thoroughly wet. Maintain agitation. Exceeding rates may create potential phytotoxicity on plant surfaces. Dilute with
enough water to obtain thorough coverage. LIVESTOCk USE DIRECTIONS USE INSECT Dilution • ESSENTRIA IC3
REMARkS Livestock Spray (Beef Cattle, Swine, Goats and Sheep) To control flying insects, including, but not limited to:
Flies, House Flies, Deer Flies, Stable Flies and aids in the control of Face Flies 1 to 3 ounces per gal of mineral oil USP
Dilute in mineral oil USP as indicated and spray directly on the animal in sufficient amounts for proper coverage. There
is no withholding period from last application to slaughter. Ticks and Lice 1 to 3 ounces per gal of mineral
oil USP Apply as above Livestock Spray (Lactating Dairy Cattle) To control flying insects, including, but not limited to:
Flies, House Flies, Deer Flies, Stable Flies and aids in the control of Face Flies 1 to 3 ounces per gal of mineral oil USP
Dilute in mineral oil USP as indicated. Direct spray to cover thoroughly. Repeat as necessary. No milk discard is
required. Care should be taken that the spray does not come in direct contact with the lactating cow’s teats unless they
are washed with an approved cleansing solution and dried before milking. Apply the spray at least 20 min. prior to
milking or after milking has been complete. Ticks and Lice 1 to 3 ounces per gal of mineral oil USP Apply as above
Horses To control flying insects, including, but not limited to: Flies, House Flies, Deer Flies, Stable Flies and aids in the
control of Face Flies 1 to 3 ounces per gal of mineral oil USP Dilute in mineral oil USP as indicated and spray directly
on the animal in sufficient amounts for proper coverage. Poultry Poultry Lice, Bedbugs, and Mites 2 to 6 ounces per gal
of mineral oil USP Spray roosts, roost poles, walls (especially cracks in walls), and nests or cages thoroughly. It is not
necessary to remove poultry from the housing unit during treatment. This should be followed by spraying over the birds
with a fine mist. PREMISE USE DIRECTIONS FOR LIVESTOCk FACILITIES USE INSECT Dilution • ESSENTRIA IC3
IN WATER OR MINERAL OIL REMARkS Residual Surface Spray Flies, Gnats, Litter Beetles, Darkling Beetles (lesser
meal worms) Mosquitoes, Spiders, Wasps 3 to 6 ounces per gal of water or mineral oil USP Apply 1 gallon of dilution
per 500 - 1000 sq. ft. Thoroughly cover walls, ceilings or other areas where pests rest or congregate in dairy barns,
horse barns, poultry houses, swine buildings, livestock sheds, and other farm buildings. Larvacide Maggots (fly larvae)
4 to 8 ounces per gal of water or mineral oil USP Apply 1 gallon of dilution per 100 sq. ft. of droppings as a coarse
spray. Repeat at 7 - 10 day intervals until droppings begin to cone up, then treat only “hot spots” (small areas found to
have large number of maggots). FOR CHEMICAL SPILL, LEAk, FIRE, OR ExPOSURE CALL: CHEMTREC 1-800-424-
9300 FOR MEDICAL EMERgENCIES ONLY CALL: 1-866-257-4118 kEEP ALL INSECTICIDES OUT OF REACH OF
CHILDREN FIRST AID If IN Eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove
contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a physician if irritation persists. If
ON Skin: • Wash exposed area thoroughly with soap and water. If INHALED: • Move exposed person(s) to fresh air. • If
breathing problems persist, get medical attention. If INgESTED: • Rinse mouth out with water. • Do not induce vomiting.
• Obtain medical attention if feeling sick or nauseous. Seek medical attention if necessary. PRECAUTIONARY
STATEMENTS Caution – May cause eye and skin irritation. Avoid contact with eyes, skin and clothing. PERSONAL
PROTECTIVE EQUIPMENT (PPE): Persons handling concentrate are recommended to wear: • Protective eyewear
• Chemical resistant gloves made of neoprene, nitrile or natural rubber USER SAFETY RECOMMENDATIONS: User
should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove clothing
immediately if the product gets inside. Wash thoroughly and put on clean clothing. Remove PPE after handling this
product. Wash the outside of the gloves before removing. PHYSICAL AND CHEMICAL HAZARDS: Do not use, pour,
spill or store near heat or open flame. Store only in original container. STORAgE & DISPOSAL Do not contaminate
water, food or feed by storage or disposal. FOR CONTAINERS LARgER THAN ONE gALLON: PESTICIDE STORAgE
AND SPILL PROCEDURES: Store upright at room temperature. Avoid exposure to extreme temperatures. In case of
spill or leakage, soak up with an absorbent material such as sand, sawdust, earth, fuller’s earth, etc. Dispose of with
trash. CONTAINER DISPOSAL: Triple rinse or its equivalent, then offer for recycling or reconditioning, or puncture and
dispose of with ordinary trash. STORAgE: Store in original container in a dry cool place inaccessible to children and
pets. DISPOSAL: Do not reuse container. Discard in trash. LIMITATION OF LIABILITY To the fullest extent permitted by
law, the manufacturer disclaims any liability whatsoever for special, incidental or consequential damages resulting from
the use or handling of this product. Buyer assumes all responsibility for safety and use not in accordance with label,
directions and precautionary statements. Envincio represents that this product is a Minimum-Risk pest control product,
and qualifies for exemption from EPA registration under the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA).
Envincio, LLC
501 Cascade Pointe Lane Suite 103, Cary, NC 27513
All Rights Reserved. Made in USA.
U.S. Patent Nos. 6,004,569
U.S. and Foreign Patent Pending
Essentria is a trademark of Envincio LLC.