Manufacturer: Rockwell Labs Ltd tel: 866 788 4101 EPA Est. No.: 73079-MO-1 Date: February 2005
1512 Taney St. fax: 816 283 3173 Prepared By: CWS
North Kansas City, MO 64116 USA emergency: 800 858 7378
Product Trade Name: InTice Granular Bait Common Name: granular insect bait with boric acid
Use: Bait for control of crawling insects EPA Reg. No.: 73079-2
Composition: The product is composed of orthoboric acid and food and feed-grade enhancers.
Form: Granules Solubility: insoluble in water and organic solvents Viscosity: N/A
Color: yellow-brown % Volatiles by Volume (25 ºC): ca. 0% pH: N/A
Odor: slight, oily grain Vapor Pressure: N/A
Specific Gravity: 0.5 at 25 ºC Vapor Density: N/A
Evaporation Rate: N/A Water Reactivity: N/A
Flash Point (Test Method): N/A Flammable Limit: N/A Auto Ignition Temp.: N/A
Extinguishing Media: Carbon dioxide dry powder or foam
Special Fire Fighting Procedures and Personnel Protection: Use appropriate fire-fighting procedures for surrounding
materials. Keep fire-exposed containers cool with water spray. Wear positive pressure self-contained breathing
apparatus approved by MSHA/NIOSH.
Unusual Fire and Explosion Hazards: The fire and explosion hazards are considered very minor. Boric acid itself is a
flame-retardant.
The product is considered practically non-toxic via the oral, dermal or inhalation routes and not considered dermally
irritating or sensitizing. The product
may cause eye irritation. Avoid dust contact with eyes. Excessive breathing of dust may cause irritation of nose and
throat.
Primary Route(s) of Entry: inhalation, ingestion
Signs and Symptoms of Over-Exposure: Intentional consumption of more than 1 to 2 oz. could cause
gastro-intestinal symptoms.
Acute and/or Chronic Effects: Product is practically non-toxic if ingested, though deliberate ingestion of quantities
could cause digestive disturbance.
Emergency and First Aid Procedures:
If in Eyes: Flush with water for at least 15 minutes and contact a physician if any persistent irritation results.
If Swallowed: If more than 1 to 2 oz. are ingested, give two glasses of water and induce vomiting if conscious, and
seek medical attention.
If on Skin: Wash with soap and water.
If Breathed: Remove to fresh air and seek medical attention if warranted or if any irritation persists.
Respirator Type: Dust mask recommended when applying with a power duster Eye Protection: Goggles
recommended when applying with a
power duster Gloves: Not required Ventilation: Use a dust mask if applying in close, unventilated areas or when
applyaing with a
power duster Other Protective Measures: In very windy conditions, goggles and a dust mask are recommended
Stability Under Normal Conditions: Stable
Hazardous Polymerization: Will not occur Conditions to Avoid: None
Incompatibility (Materials to Avoid): None Hazardous Decomposition Products: None
Steps to be Taken in the Event Material is Spilled or Released:
Small Spill: Sweep up and dispose of in proper container.
Large Spill: Shovel spilled product into proper disposal container. Clean the area with detergent and water.
Waste Disposal Procedures: Wastes resulting from use may be disposed of on site or at an approved waste disposal
facility. Dispose of wastes in
accordance with all Federal, State and Local laws.
Orthoboric acid (boric acid) - 5.0% CAS # 10043-35-3
InTice
granular bait TM MSDS Page 1 of 1
SECTION VIII - STORAGE AND HANDLING PRECAUTIONS
Storage Temperature: Room temperature. Average Shelf Life: Two years in original container.
Special Sensitivity (Heat, Light, Moisture): Avoid prolonged exposure to excessive heat. Keep moisture out of
product.
Special Precautions to be Taken in Handling and Storage: Store in original container away from excessive heat or
moisture and out of reach of children,
pets or wildlife.
SECTION IX - SHIPPING INFORMATION
DOT Shipping Name: None required DOT Hazard Classification: Non-Hazardous
DOT Labels Required: None required Freight Classification: LTL Class 60
Warranty: The information provided in this Material Safety Data Sheet has been obtained from sources believed to
be reliable. Rockwell Labs Ltd provides no warranties, express or implied, and assumes no responsibility for the
accuracy and completeness of the data contained herein. This information is
offered for your consideration and investigation. The user is responsible to ensure that they have all data relevant to
their particular use.